​[mcu PIS]

serial: /dev/serial/by-id/usb-Klipper_rp2040_E6611CB6972C6A21-if00

[adxl345]

cs_pin: PIS:gpio13

spi_software_sclk_pin: PIS:gpio10

spi_software_mosi_pin: PIS:gpio11

spi_software_miso_pin: PIS:gpio12

[resonance_tester]

accel_chip: adxl345

probe_points:

    100, 100, 20  # an example

----------------------------------------------------------------

#[input_shaper]

#shaper_freq_x: 0

#shaper_type_x: x

#shaper_freq_y: 0

#shaper_type_y: x

---------------------------------------------------------------

Comandos para verificar o endereço da porta> 

01: /dev/serial/by-id/*

02: ls /dev/serial/by-id/